Fastener Standards
This page provides a sortable reference list of widely used fastener standards across ISO, DIN, EN, BS and ANSI/ASME systems. FastenerFix‑stocked standards are highlighted for quick identification. The table covers bolts, screws, nuts, washers, pins, keys, rivets, threaded rod, thread forms, structural fasteners, coatings and general fastener terminology.
Important Note: Standard numbers are not globally unique. Identical numerics may appear in ISO, DIN or EN standards while referring to completely different products, particularly when the standards originate from unrelated technical domains (for example, fasteners versus textiles or metrology). Even experienced engineers often assume these numbers are unique, but the compilation of this data resource has highlighted just how misleading that assumption can be. Each entry is therefore identified by its full standard designation, not by number alone.
Did you know?
The number 4035 appears in multiple standards systems but refers to completely different products depending on the issuing body. For example:
- ISO 4035 / DIN EN ISO 4035 – Hexagon thin nuts (fasteners)
- DIN EN 4035 – Aerospace rod end with self‑aligning double‑row ball bearing
- SAE AMS 4035 – Aluminium alloy sheet and plate (materials specification)
- SAE MA 4035 – Spiral‑wound retaining rings (mechanical components)
- JIS E 4035 – Railway rolling stock temperature test methods
Same numerics, entirely different engineering domains. This is why FastenerFix identifies each entry by its full standard designation, not by number alone.
Standards Table
Filter by family:
Sort the table:
Use the column headings to sort the table. This list is intended as a practical engineering reference and will continue to expand as additional standards are adopted.
Use the column headings to sort the table. This list is intended as a practical engineering reference and will continue to expand as additional standards are adopted.
Count:
| Primary Standard | Secondary Standard | Stock | Title | Description | Family |
|---|---|---|---|---|---|
| DIN 982 | — | — | Prevailing-torque all-metal hexagon nut, style V | All-metal prevailing-torque hex nut, Style V. | nuts |
| DIN 979 | — | — | Prevailing-torque all-metal hexagon nut, style T | All-metal prevailing-torque hex nut, Style T. | nuts |
| DIN 981 | — | — | Prevailing-torque all-metal hexagon nut, slotted | Slotted all-metal prevailing-torque hex nut. | nuts |
| DIN 983 | — | — | Prevailing-torque all-metal hexagon nut, thin pattern | Thin-pattern all-metal prevailing-torque hex nut. | nuts |
| DIN 7337 | — | — | Blind rivets (open-end type) | Standard open-end blind rivet. | rivets |
| ISO 1207 | DIN 84 |
|
Slotted cheese head screws | Standard slotted cheese-head machine screws stocked by FastenerFix. | screws |
| DIN 472 | — | — | Internal retaining rings for bores | Internal circlip for bore retention. | retaining-rings |
| DIN 3017 | — | — | Internal retaining rings for bores, heavy type | Heavy-duty internal circlip for bore retention. | retaining-rings |
| DIN 471 | — | — | External retaining rings for shafts | External circlip for shaft retention. | retaining-rings |
| DIN 3016 | — | — | External retaining rings for shafts, heavy type | Heavy-duty external circlip for shaft retention. | retaining-rings |
| DIN 7603 | — | — | Sealing washers | Solid copper sealing washer for fluid and gas sealing. | washers |
| DIN 7604 | — | — | Hollow sealing washers | Hollow copper sealing washer for sealing threaded joints. | washers |
| DIN 7972 | — | — | Countersunk head tapping screws | Self-tapping countersunk screw for sheet metal. | tapping-screws |
| DIN 7982 | — | — | Countersunk head tapping screws | Self-tapping countersunk screw for sheet metal. | tapping-screws |
| ISO 7046 | DIN 965-Z |
|
Countersunk head screws with cross recess (H-type) | Pozi-drive countersunk machine screws stocked by FastenerFix. | screws |
| ISO 2009 | DIN 963 |
|
Slotted countersunk head screws | Slotted countersunk machine screws stocked by FastenerFix. | screws |
| ISO 10642 | DIN 7991 | — | Hexagon socket countersunk head screws | Hexagon socket countersunk screw for flush mounting. | screws |
| ISO 14581 | — | — | Hexagon socket countersunk head screws - reduced head | Low-profile countersunk socket screw. | screws |
| DIN 605 | — | — | Countersunk square neck bolts | Countersunk square-neck bolt for timber and metal joints. | bolts |
| DIN 608 | — | — | Countersunk square neck bolts (long neck) | Variant countersunk square-neck bolt for structural applications. | bolts |
| DIN 7981 | — | — | Cross recessed pan head tapping screws | Self-tapping pan-head screw for sheet metal. | tapping-screws |
| ISO 7050 | — | — | Cross recessed countersunk head tapping screws | Self-tapping countersunk screw for sheet metal applications. | tapping-screws |
| ISO 7051 | — | — | Cross recessed pan head tapping screws | Self-tapping pan-head screw for sheet metal. | tapping-screws |
| DIN 603 | — | — | Round head square neck bolts | Round-head square-neck bolt for timber and metal fixings. | bolts |
| DIN 128 | — | — | Curved spring washers (Form A) | Curved spring washer (Form A) for maintaining preload. | washers |
| DIN 1 | — | — | Unhardened Dowel Pins (Legacy DIN 1) | Unhardened dowel pin used for basic alignment and positioning in mechanical assemblies. DIN 1 is a legacy German standard superseded by ISO 2338 (unhardened parallel pins) and ISO 8734 (hardened dowel pins). | pins |
| DIN 2093 | — | — | Disc springs (Belleville washers) | Conical disc spring for high-load applications. | washers |
| DIN 6796 | — | — | Disc spring washers for bolt assemblies | High-load disc spring for bolt preload retention. | washers |
| DIN 835 | — | — | Double end studs - equal thread lengths | Stud with equal thread lengths. | rods |
| DIN 939 | — | — | Double end studs - equal thread lengths (long engagement) | Stud with equal thread lengths both ends. | rods |
| DIN 938 | — | — | Double end studs - reduced shank | Stud with reduced shank for alignment. | rods |
| ISO 4042 | — | — | Fasteners - electroplated coatings | Specifies zinc, nickel and other electroplated coatings. | surface-treatments |
| DIN 6797 | — | — | External toothed lock washers | External teeth for vibration resistance. | washers |
| ISO 7094 | DIN 440 | — | Extra-large series plain washers | Extra-large OD washer for load distribution. | washers |
| DIN 580 | — | — | Lifting eye bolts | Lifting eye bolt for load handling. | lifting |
| DIN 4447 | — | — | Special pattern eye bolts | Special-pattern eye bolt for mechanical assemblies. | bolts |
| DIN 582 | — | — | Lifting eye nuts | Lifting eye nut for load attachment. | lifting |
| DIN 529 | — | — | Lifting eye bolts (legacy pattern) | Legacy DIN-pattern lifting eye bolt used for load handling and attachment points. Superseded by DIN 580. | lifting |
| ISO 3269 | — | — | Fasteners - acceptance inspection | Inspection and acceptance requirements for fasteners. | quality |
| ISO 1891 | — | — | Fasteners - vocabulary | Vocabulary and definitions for fastener terms. | terminology |
| ISO 4759 | — | — | Fasteners - dimensional tolerances | Dimensional tolerances for bolts, screws and nuts. | tolerances |
| DIN 1596 | — | — | Fastening clamps - standard pattern | Standard U-shaped fastening clamp for mechanical assemblies. | clamps |
| DIN 1598 | — | — | Fastening clamps - heavy-duty pattern | Heavy-duty fastening clamp for industrial use. | clamps |
| DIN 1597 | — | — | Fastening clamps - variant pattern | Variant fastening clamp for machinery. | clamps |
| DIN 688 | — | — | Feather keys | Parallel feather key for shaft-hub torque transmission. | keys |
| EN 14399-8 | DIN 7968 | — | Fit bolts for structural steelwork | Fit bolt for structural steel connections. | bolts |
| DIN 610 | — | — | Precision fit bolts | High-precision fit bolt for machinery and structural assemblies. | bolts |
| DIN 609 | — | — | Close-tolerance fit bolts | Precision fit bolt with close-tolerance shank. | bolts |
| DIN 6923 | — | — | Flange lock nuts | Hex nut with integrated flange for load distribution. | nuts |
| DIN 6924 | — | — | Prevailing-torque flange lock nuts | Prevailing-torque flange nut with locking feature. | nuts |
| DIN 661 | — | — | Flat countersunk rivets | Flat countersunk solid rivet. | rivets |
| DIN 662 | — | — | Flat countersunk rivets - variant | Variant countersunk rivet for sheet metal. | rivets |
| DIN 604 | — | — | Flat countersunk square neck bolts | Standard countersunk square-neck bolt (DIN pattern). | bolts |
| DIN 689 | — | — | Flat round head rivets | Standard flat round head solid rivet. | rivets |
| DIN 1473 | — | — | Grooved pins - General purpose | General-purpose grooved pin with standard groove geometry for mechanical fastening and press-fit retention. | pins |
| DIN 1475 | — | — | Grooved pins - Enhanced retention | Grooved pin with modified groove geometry providing increased radial expansion and superior retention for vibration-prone or dynamic assemblies. | pins |
| DIN 1472 | — | — | Grooved pins - Spiral grooves | Grooved pin with spiral-cut grooves providing progressive radial expansion and increased retention for vibration-prone or dynamic assemblies. | pins |
| DIN 1471 | — | — | Grooved pins - Straight grooves | Grooved pin with straight longitudinal grooves providing uniform radial expansion for general press-fit retention. | pins |
| DIN 1474 | — | — | Grooved pins - Heavy-duty | Heavy-duty grooved pin with deeper groove geometry providing high radial expansion and strong retention for industrial and high-load applications. | pins |
| DIN 1476 | — | — | Grooved pins - Type A (standard) | Standard Type A grooved pin with straight grooves for general press-fit retention in mechanical assemblies. | pins |
| DIN 1479 | — | — | Grooved pins - Type A (variant) | Variant of the Type A grooved pin with modified groove geometry for altered insertion and retention behaviour in specialised applications. | pins |
| DIN 1477 | — | — | Grooved pins - Type B | Grooved pin with alternative Type B groove geometry providing distinct insertion and retention characteristics for specialised mechanical assemblies. | pins |
| DIN 7976 | — | — | Hanger bolts | Wood-to-metal hanger bolt with dual thread. | bolts |
| ASME B18.2.2 | ANSI B18.2.2 | — | Hex and jam nuts (Unified Inch Series) | Imperial hex nuts and thin-pattern jam nuts manufactured to ASME dimensional requirements for UNC and UNF threads. Covers widths across flats, heights, tolerances and thread classes. | nuts |
| DIN 911 | — | — | Hexagon keys | Hexagon key for socket screws. | hand-tools |
| DIN 6925 | — | — | Hexagon bolts with flange | Flanged hex bolt for structural connections. | bolts |
| DIN 1587 | — | — | Hexagon cap nuts (dome) | Dome nut for protective and aesthetic applications. | nuts |
| DIN 917 | — | — | Hexagon cap nuts (low profile) | Low-profile cap nut for mechanical assemblies. | nuts |
| DIN 986 | — | — | Hexagon cap nuts (prevailing torque) | Prevailing-torque cap nut with nylon insert. | nuts |
| DIN 6334 | — | — | Hexagon coupling nuts | Long nut for joining threaded rods. | nuts |
| DIN 6917 | — | — | Hexagon flange nuts | Flange nut for structural bolting. | nuts |
| DIN 6918 | — | — | Hexagon flange nuts (fine pitch) | Fine-pitch flange nut. | nuts |
| DIN 601 | — | — | Hexagon head bolts (part thread) | Partially threaded hex bolt. | bolts |
| ISO 4014 | DIN 931 |
|
Hexagon head bolts | Partially threaded hex bolts stocked by FastenerFix. | bolts |
| DIN 910 | — | — | Hexagon head screw plugs with collar | External-hex plug for pipe sealing applications. | plugs |
| ISO 4017 | DIN 933 |
|
Hexagon head set screws - Full-thread pattern | Fully threaded hex screws stocked by FastenerFix. | bolts |
| ISO 7990 | — | — | Hexagon head structural bolts | Structural bolt for high-duty applications. | bolts |
| DIN 70852 | — | — | Hexagon nuts - High-strength, standard type | High-strength hex nut. | nuts |
| DIN 555 | — | — | Hexagon nuts - Standard type | Standard hex nut for general fastening. | nuts |
| DIN 10512 | — | — | Hexagon nuts - Fine-pitch, heavy-pattern type | Heavy-pattern fine-pitch hex nut. | nuts |
| DIN 10513 | — | — | Hexagon nuts - Fine-pitch, light-pattern type | Light-pattern fine-pitch hex nut. | nuts |
| DIN 7434 | — | — | Hexagon nuts - Fine-pitch, precision type | Fine-pitch hex nut for precision applications. | nuts |
| DIN 10511 | — | — | Hexagon nuts - Fine-pitch, general-engineering type | Fine-pitch hex nut for general engineering. | nuts |
| DIN 9925 | DIN 7993-A | — | Round wire snap rings for shafts | Round wire retaining ring for shafts, replacing the former DIN 7993-A standard. Used for axial retention in grooves. Edition 2019-12. | retaining-rings |
| DIN 7435 | — | — | Hexagon nuts - Fine-pitch, machinery type | Fine-pitch hex nut for machinery. | nuts |
| DIN 1804 | — | — | Hexagon nuts - Fine-pitch, precision-assembly type | Fine-pitch hex nut for precision assemblies. | nuts |
| DIN 13023 | — | — | Hexagon nuts - Fine-pitch, precision-use type | Fine-pitch hex nut for precision use. | nuts |
| DIN 5406 | — | — | Hexagon nuts - Fine-pitch, special-application type | Fine-pitch hex nut for special applications. | nuts |
| DIN 40736 | — | — | Hexagon nuts - Fine-pitch, special-machinery type | Fine-pitch hex nut for special machinery. | nuts |
| DIN 70952 | — | — | Hexagon nuts - Fine-pitch, high-strength | Fine-pitch high-strength hex nut. | nuts |
| DIN 74361 | — | — | Hexagon nuts - Fine-pitch, demanding-application type | Fine-pitch nut for demanding applications. | nuts |
| DIN 3404 | — | — | Hexagon nuts - Fine-pitch, mechanical-engineering type | Fine-pitch nut for mechanical engineering. | nuts |
| DIN 6340 | — | — | Hexagon nuts - Heavy-series type | Heavy-duty hex nut for structural use. | nuts |
| DIN 80705 | — | — | Hexagon nuts - High-strength, critical-joint type | High-strength hex nut for critical joints. | nuts |
| DIN 71412 | — | — | Hexagon nuts - High-strength, structural | High-strength hex nut for structural applications. | nuts |
| DIN 11024 | — | — | Hexagon nuts - High-temperature, fine-pitch thread | Fine-pitch high-temperature hex nut. | nuts |
| DIN 11023 | — | — | Hexagon nuts - High-temperature type | General-purpose high-temperature resistant hex nut for elevated-temperature service in mechanical assemblies. | nuts |
| DIN 16983 | — | — | Hexagon nuts - High-temperature, demanding-application type | High-temperature resistant hex nut for demanding engineering applications such as furnace construction, thermal machinery and chemical plant equipment. | nuts |
| DIN 6331 | — | — | Hexagon nuts - High type, product grade B | High-type hex nut manufactured to product grade B tolerances for general mechanical fastening. | nuts |
| DIN 6330 | — | — | Hexagon nuts - High type, product grade A | High-type hex nut manufactured to product grade A tolerances for precision mechanical assemblies. | nuts |
| DIN 15480 | — | — | Hexagon nuts - Prevailing torque, all-metal | All-metal prevailing torque lock nut. | nuts |
| DIN 8673 | — | — | Hexagon nuts - Prevailing torque, all-metal | All-metal prevailing torque lock nut. | nuts |
| DIN 15482 | — | — | Hexagon nuts - Prevailing torque, all-metal, heavy-duty | All-metal prevailing torque nut for heavy-duty applications. | nuts |
| DIN 15481 | — | — | Hexagon nuts - Prevailing torque, fine-pitch, all-metal | Fine-pitch all-metal prevailing torque lock nut. | nuts |
| DIN 8675 | — | — | Hexagon nuts with non-metallic insert | Lock nut with non-metallic insert. | nuts |
| DIN 8676 | — | — | Hexagon nuts with non-metallic insert - Fine-pitch thread | Fine-pitch lock nut with non-metallic insert. | nuts |
| DIN 7643 | — | — | Hexagon nuts with nylon insert - Fine-pitch thread | Fine-pitch nylon insert lock nut. | nuts |
| ISO 4032 | DIN 934 |
|
Hexagon nuts | Standard hex nuts stocked by FastenerFix. | nuts |
| DIN 14579 | — | — | Hexagon socket head cap screws - Special dimensions | Socket cap screw with special dimensions. | screws |
| DIN 14586 | — | — | Hexagon socket head cap screws - Special geometry | Socket cap screw with special geometry. | screws |
| DIN 14585 | — | — | Hexagon socket head cap screws - Fine-pitch thread | Fine-pitch socket cap screw. | screws |
| DIN 2936 | — | — | Hexagon socket keys | Hex key for socket head screws. | hand-tools |
| DIN 908 | — | — | Hexagon socket pipe plugs | Internal-hex plug for sealing threaded pipe connections. | plugs |
| DIN 4035 | — | — | Hexagon thin nuts - Fine-pitch thread | Fine-pitch thin nut for precision assemblies. | nuts |
| DIN 431 | — | — | Hexagon thin nuts - Left-hand thread | Thin hex nut with left-hand thread. | nuts |
| ISO 21670 | DIN 929 | — | Hexagon weld nuts - Projection type | Hex weld nut with projections for welding. | nuts |
| DIN 928 | — | — | Hexagon weld nuts - For sheet-metal applications | Projection weld nut for sheet metal. | nuts |
| EN 14399-4 | — | — | High-strength structural bolting assemblies for preloading - Part 4: **HV bolts** | High-strength structural bolt for preloaded assemblies. | bolts |
| EN 14399-3 | — | — | HV Nuts | High-strength nut for preloaded structural bolting assemblies. | nuts |
| EN 14399-6 | — | — | HV washers | Washer for high-strength preloaded structural bolting. | washers |
| EN 10204 | DIN EN 10204 | — | Inspection certificates | Standard for inspection documents for metallic products. | quality |
| DIN 6799 | — | — | Internal toothed lock washers | Internal teeth for secure locking. | washers |
| ISO 261 | — | — | ISO metric thread pitch series | Specifies coarse and fine thread pitch combinations. | threads |
| ISO 68-1 | — | — | ISO metric thread profile | Defines the basic profile of ISO metric screw threads. | threads |
| DIN 466 | — | — | Knurled thumb nuts | Thumb nut with knurled grip. | nuts |
| DIN 464 | — | — | Knurled thumb screws | Thumb screw with knurled head for manual tightening. | screws |
| DIN 653 | — | — | Knurled thumb screws | Thumb screw with knurled head. | screws |
| DIN 467 | — | — | Knurled thumb screws - Low type | Low-profile knurled thumb screw. | screws |
| ISO 7093 | DIN 9021 | — | Plain washers - Large series | Large outer-diameter plain washer. | washers |
| DIN 6900 | — | — | Lock Washers | Locking washer for securing threaded fasteners. | washers |
| DIN 6901 | — | — | Lock washers - Vibration-resistant type | Variant locking washer for vibration resistance. | washers |
| ISO 898-1 | — | — | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs | Defines strength grades such as 8.8, 10.9 and 12.9. | mechanical-properties |
| ISO 898-2 | — | — | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified proof load values | Defines nut strength classes and proof loads. | mechanical-properties |
| ISO 898-5 | — | — | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stress | Defines mechanical property classes and performance requirements for set screws, including hardness, torsional strength and proof torque values. | mechanical-properties |
| ISO 898-6 | — | — | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 6: Nuts with specified proof load values | Specifies mechanical property classes and proof load requirements for nuts used with bolts of property classes up to 12.9. | mechanical-properties |
| NFE 27-128 | — |
|
Mushroom head slotted screws | French standard mushroom-head slotted screws stocked by FastenerFix. | screws |
| EN 15048 | DIN EN 15048 | — | Non-preloaded structural bolting assemblies | Requirements for structural assemblies using non-preloaded bolts. | bolts |
| DIN 6336 | — | — | Operating handles - Ergonomic type | Ergonomic operating handle for equipment. | handles |
| DIN 6337 | — | — | Operating handles - Knurled type | Knurled operating handle for manual adjustment. | handles |
| DIN 6335 | — | — | Operating handles - Standard type | Standard operating handle for machinery. | handles |
| ISO 7045 | DIN 7985-Z |
|
Pan head screws with cross recess | Pozi-drive pan-head machine screws stocked by FastenerFix. | screws |
| ISO 1580 | DIN 85 |
|
Slotted pan head screws | Slotted pan-head machine screws stocked by FastenerFix. | screws |
| ISO 7049 | DIN 7983 | — | Cross-Recessed Pan Head Tapping Screws | Pan-head self-tapping screw for sheet metal. | tapping-screws |
| ISO 773 | DIN 6885 A | — | Rectangular Parallel Keys and Keyways with Width b from 2 mm to 100 mm | Parallel key (Type A) for shaft-hub connections. | keys |
| DIN 705 | — | — | Adjusting Rings | Adjusting ring for positioning and securing components on a shaft. | shaft-collars |
| DIN 6887 | — | — | Stressed-Type Fastenings with Taper Action; Taper Keys with Gib Head, Keyways, Dimensions and Application | Taper key with gib head for stressed-type shaft-hub fastenings, including keyway dimensions and application. | keys |
| DIN 8734 | — | — | Parallel Key (Type A, Precision) | Type A parallel key for shaft-hub connections. | keys |
| ISO 8734 | DIN EN ISO 8734 | — | Hardened Parallel Dowel Pins (ISO 8734) | Hardened and precision-ground parallel dowel pin for accurate location, alignment and repeatable positioning in mechanical assemblies. ISO 8734 is the international reference standard for hardened dowel pins. | pins |
| ISO 8735 | DIN EN ISO 8735 | — | Parallel Pins with Internal Thread, of Hardened and Martensitic Stainless Steel | Hardened parallel pin with internal thread for extraction or secure axial positioning. | pins |
| ISO 8737 | DIN EN 28737 | — | Taper pins with external thread, unhardened | Unhardened taper pin with external thread for axial extraction and precise positioning. | pins |
| ISO 8736 | DIN EN 28736 | — | Unhardened Taper Pins with Internal Thread | Unhardened taper pin with internal thread for axial extraction and precise positioning. | pins |
| ISO 8740 | DIN EN ISO 8740 | — | Parallel Grooved Pins with Chamfer Point - Full-Length Diamond Grooves | Parallel grooved pin with chamfer point and full-length diamond grooves for secure interference-fit fastening. | pins |
| ISO 8741 | DIN EN ISO 8741 | — | Reverse-Taper Grooved Pins - Half-Length Progressive Grooves | Reverse-taper grooved pin with half-length progressive grooves for controlled interference-fit fastening. | pins |
| ISO 8746 | DIN EN ISO 8746 | — | Grooved Pins with Round Head - Full-Length Diamond Grooves | Grooved pin with round head and full-length diamond grooves for secure interference-fit fastening. | pins |
| ISO 8748 | DIN EN ISO 8748 | — | Spring-Type Straight Pins - Coiled, Heavy Duty | Heavy-duty coiled spring pin designed for high-strength fastening and shock absorption. | pins |
| DIN 6888 | — | — | Drive Type Fastenings Without Taper Action - Woodruff Keys - Dimensions and Application | Semi-circular Woodruff key for shaft-hub assemblies. | keys |
| DIN 7 | — | — | Unhardened Parallel Pins (Legacy DIN 7) | Unhardened parallel pin used for general engineering, alignment and location applications. DIN 7 is a legacy German standard superseded by ISO 2338 for unhardened parallel pins. | pins |
| DIN 7979 | — | — | Parallel Pins with Internal Thread | Parallel pin with internal thread for extraction and precise location. | pins |
| DIN 6325 | — | — | Hardened and Ground Parallel Pins (DIN 6325) | Hardened and precision-ground parallel pin for accurate location, alignment and repeatable positioning in mechanical assemblies. DIN 6325 defines the DIN pattern for hardened and ground parallel pins, tolerance class m6. | pins |
| ISO 2338 | DIN 2339 | — | Unhardened Parallel Pins (ISO 2338) | Unhardened parallel pin for general engineering, alignment and location applications. ISO 2338 is the international reference standard for unhardened parallel pins. | pins |
| DIN 2341 | — | — | Parallel Pins - Type B (With Head) | Unhardened parallel pin with head for general engineering and assembly applications. | pins |
| ISO 2341 | DIN 1444 | — | Clevis Pins with Head | Clevis pin with head for linkage, joint, and mechanical fastening applications. | pins |
| DIN 2342 | — | — | Parallel Pins - Type C | Unhardened parallel pin with modified end (Type C) for assembly and positioning applications. | pins |
| ISO 2342 | DIN 427 | — | Slotted Headless Screws with Shank | Slotted headless screw with plain shank for adjustment, retention, and mechanical stop applications. | screws |
| ISO 228-1 | — | — | Pipe Threads - Parallel (Non-Pressure-Tight) | Parallel pipe threads for mechanical joints where pressure-tight sealing is not achieved on the threads. | threads |
| ISO 7-1 | — | — | Pipe Threads - Tapered (Pressure-Tight) | Tapered pipe threads for pressure-tight joints where sealing is achieved on the thread flanks. | threads |
| ISO 7092 | DIN 433 | — | Plain Washers - Small Series - Product grade A | Small-series plain washer for screws with reduced bearing surfaces. | washers |
| ISO 7091 | DIN 126 | — | Plain washers - Normal series - Product grade C | Normal-series plain washer for general-purpose bolted joints and mechanical assemblies. | washers |
| ISO 7089 | DIN 125-1(A) |
|
Plain washers - Normal series - Product grade A | Standard Form A plain washer for general-purpose bolted joints and mechanical assemblies. | washers |
| ISO 7090 | DIN 125-1(B) |
|
Plain washers - Normal series - Product grade A - Chamfered | Chamfered Form B plain washer for general-purpose bolted joints and mechanical assemblies. | washers |
| DIN 7973 | — | — | Raised countersunk head tapping screws | Raised countersunk self-tapping screw for sheet-metal and general fastening applications. | tapping-screws |
| ISO 7047 | DIN 966-Z |
|
Raised countersunk head screws with cross recess | Raised countersunk Pozi machine screws for general-purpose mechanical assemblies; stocked by FastenerFix. | screws |
| DIN 7986 | — | — | Raised countersunk head screws with cross recess | Raised countersunk machine screw with cross recess (Phillips/Pozi) for general mechanical assemblies. | screws |
| ISO 2010 | DIN 964 |
|
Raised countersunk head screws with slot | Raised countersunk slotted machine screws for general-purpose mechanical assemblies; stocked by FastenerFix. | screws |
| DIN 9022 | — | — | Rosette washers | Washer with enlarged bearing surface for load distribution in structural and mechanical assemblies. | washers |
| DIN 660 | — | — | Round head solid rivets | Standard round head solid rivet for permanent mechanical fastening in structural and sheet-metal assemblies. | rivets |
| DIN 444 | — | — | Eye bolts | Standard eye bolt for mechanical linkages, tensioning, and lifting applications. | lifting |
| DIN 442 | — | — | Sealing expanding caps | Expanding sealing caps used to close, protect, or seal openings in mechanical and structural assemblies. | plugs |
| DIN 443 | — | — | Sealing push-in caps | Push-in sealing caps for closing and protecting openings in mechanical and structural assemblies. | plugs |
| DIN 7504 | — | — | Self-drilling screws | Self-drilling screw for metal construction; includes DIN 7504 forms A, B, C, D and K. | tapping-screws |
| ISO 15480 | — | — | Thread-forming screws with metric thread | Thread-forming screw for creating internal threads in ductile metals and aluminium; requires a pre-drilled hole. | tapping-screws |
| ISO 15481 | — | — | Thread-forming screws - Trilobular form | Trilobular thread-forming screw for creating internal threads in ductile metals; requires a pre-drilled hole. | tapping-screws |
| ISO 15482 | — | — | Thread-rolling screws | Thread-rolling screw for creating high-strength internal threads in ductile metals; requires a pre-drilled hole. | tapping-screws |
| ISO 15483 | — | — | Thread-forming screws for thermoplastics | Thread-forming screw designed for creating durable internal threads in thermoplastic materials without cracking or excessive stress. | tapping-screws |
| DIN 7508 | — | — | Self-drilling screws for structural applications | High-strength self-drilling screw for structural metal-to-metal connections in construction and engineering. | tapping-screws |
| DIN 7505 | — | — | Wood screws | Wood screw for timber construction; includes DIN 7505 forms A, B, C and D. | screws |
| DIN 7338 | — | — | Rivets for brake linings and clutch linings | Rivets used for fastening brake linings and clutch linings in automotive and industrial applications. | rivets |
| DIN 558 | — | — | Hexagon head bolts - Short thread | Hexagon head bolt with short thread length for general mechanical and structural fastening. | bolts |
| DIN 559 | — | — | Hexagon head bolts - Short thread (variant) | Hexagon head bolt with short thread length; dimensional variant of DIN 558 for general mechanical fastening. | bolts |
| DIN 621 | — | — | Flat round head solid rivets | Flat round head solid rivet used for fastening sheet metal and light structural assemblies. | rivets |
| DIN 988 | — | — | Shim rings and supporting rings | Precision shim and supporting rings for axial spacing, adjustment and tolerance compensation in mechanical assemblies. | washers |
| DIN 796 | — | — | Long sleeve nuts | Long-pattern sleeve nut used for tensioning, clamping and mechanical assemblies requiring extended internal thread engagement. | nuts |
| DIN 797 | — | — | Sleeve nuts - Variant pattern | Sleeve nut in a variant pattern used for mechanical assemblies requiring extended internal thread engagement. | nuts |
| ISO 4028 | DIN EN ISO 4028 | — | Hexagon socket set screws with dog point | Internal-hexagon set screw with dog point for axial positioning and mechanical locking. ISO 4028 is the international reference standard. | screws |
| DIN 561 | — | — | Hexagon head set screws with small hexagon and full dog point | Set screw with small hexagon head and full dog point for axial positioning and mechanical locking. | screws |
| DIN 97 | — | — | Slotted countersunk (flat) head wood screws | Traditional slotted countersunk wood screw with tapered shank for timber fastening. | screws |
| DIN 95 | — | — | Slotted raised countersunk (oval) head wood screws | Traditional slotted raised countersunk wood screw with tapered shank for timber fastening. | screws |
| DIN 96 | — | — | Slotted round head wood screws | Traditional slotted round head wood screw with tapered shank for timber fastening. | screws |
| DIN 935-1 | — | — | Hexagon slotted and castle nuts - product grades A and B | Precision slotted or castellated nut for use with split pins on drilled bolts, available in metric coarse and fine pitch. | nuts |
| DIN 935-3 | — | — | Hexagon slotted nuts - product grade C | Slotted nut for use with split pins, manufactured to product grade C for general-purpose applications. | nuts |
| DIN 909 | — | — | Hexagon head pipe plugs with conical thread | External-hex pipe plug with tapered (conical) thread for sealing threaded ports in hydraulic and mechanical systems. | plugs |
| ISO 4029 | DIN EN ISO 4029 | — | Hexagon socket set screws with cup point | Internal-hexagon set screw with cup point for high holding power in mechanical assemblies. | screws |
| DIN 927 | — | — | Slotted shoulder screws | Precision shoulder screw with slotted drive, used for linkages, guides, and mechanical assemblies requiring a defined bearing surface. | screws |
| DIN 99 | — | — | Tapered handles | Tapered machine handle for operating levers, fixtures, and mechanical equipment. | handles |
| DIN 562 | — | — | Square thin nuts - product grade B | Thin-pattern square nut for general mechanical fastening where reduced height is required. | nuts |
| ISO 4027 | DIN EN ISO 4027 | — | Hexagon socket set screws with cone point | Internal-hexagon set screw with cone point for secure, high-precision locking in mechanical assemblies. | screws |
| DIN 564 | — | — | Hexagon head set screws with small hexagon and half-dog point / flat-cone point | Set screw with reduced hexagon head and either half-dog point or flat-cone point for mechanical locking and positioning applications. | screws |
| DIN EN 1661 | ISO 4161 | — | Hexagon flange nuts (ISO/DIS 4161:1996, modified) | Hexagon nut with integrated flange for improved load distribution and resistance to loosening under vibration. | nuts |
| DIN EN 1663 | ISO 7043 | — | Prevailing-torque hexagon flange nuts with non-metallic insert | Hexagon nut with integrated flange and non-metallic insert providing prevailing-torque locking and improved load distribution. | nuts |
| DIN 7513 | — | — | Thread-cutting screws - hexagon and slotted head | Thread-cutting screws with hexagon or slotted head forms, including dimensional, mechanical, and testing requirements. | screws |
| DIN 470 | — | — | Sealing washers | General-purpose sealing washer for fluid and gas sealing under bolt heads, nuts, and fittings. | washers |
| DIN 319 | — | — | Ball knobs | Spherical operating knob for levers, clamping devices, and machine controls. Available with threaded hole, threaded stud, or plain bore. | handles |
| DIN 546 | — | — | Slotted round nuts | Compact slotted round nut for mechanical assemblies requiring reduced outside diameter or limited radial space. | nuts |
| ISO 12474 | DIN EN ISO 12474 | — | Hexagon socket head cap screws with metric fine pitch thread | Socket head cap screw with metric fine-pitch thread. Fine threads provide improved adjustment accuracy and higher resistance to loosening. | screws |
| DIN 7516 | — | — | Thread-cutting screws - cross recessed head | Thread-cutting screws with cross recessed head forms, including dimensional, mechanical, and testing requirements. | screws |
| DIN 404 | — | — | Slotted capstan screws | Capstan-head screw with slotted drive and radial holes for bar operation, used for precision adjustment and machine fixtures. | screws |
| ISO 7044 | DIN EN 1664 | — | All-metal prevailing-torque hexagon flange nuts | All-metal prevailing-torque hexagon nuts with integrated flange, providing vibration-resistant locking without a non-metallic insert. | nuts |
| DIN EN 1665 | — | — | Hexagon bolts with flange, heavy series | Heavy-series hexagon flange bolt with enlarged bearing surface for improved load distribution and structural performance. | bolts |
| ISO 4766 | DIN EN ISO 4766 | — | Slotted set screws with flat point | Slotted drive set screw with flat point for secure axial positioning without surface penetration. Updated to ISO 4766:2024. | screws |
| ISO 7434 | DIN EN ISO 7434 | — | Slotted set screws with cone point | Slotted drive set screw with cone point for high penetration and secure axial locking. Updated to ISO 7434:2024. | screws |
| DIN 478 | — | — | Square head bolts with collar | Square-head bolt with integral collar for increased bearing area, used in machine construction and fixture assemblies. | bolts |
| ISO 4762 | DIN 912 |
|
Hexagon socket head cap screws | Standard internal-hexagon cap screws used for general mechanical fastening. ISO 4762 is the international reference standard; DIN 912 is the German adoption. | screws |
| ISO 4026 | DIN EN ISO 4026 | — | Hexagon socket set screws with flat point | Internal-hexagon set screw with flat point for secure axial positioning without surface penetration. Updated to ISO 4026:2026 (pre-publication). | screws |
| DIN 895 | — | — | Double-ended box wrenches | Double-ended box wrench for engineering and general mechanical use, defined by DIN 895. | hand-tools |
| DIN 894 | — | — | Double-ended open-ended wrenches | Double-ended open-ended wrench for mechanical and engineering use, defined by DIN 894. | hand-tools |
| ISO 1234 | — | — | Split pins | Standard split pins used for securing nuts, clevis pins, and mechanical linkages. ISO 1234 is the international reference standard. | pins |
| DIN 127 | — | — | Spring lock washers (split) | Split spring lock washer used to provide tension and resist loosening under vibration. | washers |
| DIN 7965 | — | — | Screwed inserts (screw plugs) | Threaded screwed inserts used as removable or permanent screw plugs in mechanical and engineering applications. Defined by DIN 7965. | inserts |
| DIN 7980 | — | — | Spring lock washers (heavy type) | Heavy-type split spring lock washer providing increased tension and resistance to loosening under vibration. | washers |
| DIN 7967 | — | — | Self-locking spring washers for screws | Formed self-locking spring washer used as a counter-nut element to prevent loosening under vibration. Defined by DIN 7967. | washers |
| ISO 8752 | DIN EN ISO 8752 | — | Spring-type straight pins - Slotted, heavy duty | Heavy-duty slotted spring pin used for high-strength fastening, shock absorption, and secure positioning. Defined by ISO 8752:2009. | pins |
| DIN 906 | — | — | Internal drive pipe plugs - Conical thread | Internal-drive pipe plug with tapered (conical) thread for sealing threaded ports in mechanical, hydraulic, and pneumatic systems. Defined by DIN 906 (Draft 2026-03). | plugs |
| DIN 479 | — | — | Square head bolts with short dog point | Square-head set screw with short dog point for mechanical adjustment, positioning, and locking. Defined by DIN 479 (Edition 2016-08). | screws |
| DIN 480 | — | — | Square head bolts without collar | Square-head bolt without collar for use in machine construction, fixtures, and clamping systems. Companion standard to DIN 478. | bolts |
| DIN 557 | — | — | Square nuts - Product grade C | Full-height square nuts for general mechanical fastening. Defined by DIN 557 (Edition 2026-02). | nuts |
| ISO 3506 | DIN EN ISO 3506 | — | Stainless steel fasteners - Mechanical and corrosion-resistance grades | ISO 3506 defines the mechanical properties, corrosion classifications and grade designations (A1-A5, property classes such as A2-70 and A4-80) for stainless steel fasteners across bolts, screws, nuts and related components. | materials |
| DIN 186 | — | — | T-head bolts with square neck | T-head bolt with square neck for use in T-slots, machine tables and channel systems. Defined by DIN 186 (Edition 2024-11). | bolts |
| DIN 508 | — | — | T-slot nuts | Rectangular nut designed to fit T-slots in machine tables, fixtures and clamping systems. Defined by DIN 508. | nuts |
| DIN 432 | — | — | Tab washers | Single-tab lock washer used to prevent rotation of nuts, bolts or shafts by bending the tab against a flat surface. Defined by DIN 432. | washers |
| DIN 463 | — | — | Tab washers (double tab) | Double-tab lock washer used to prevent rotation of nuts, bolts or shafts by bending the tabs against flats or into slots. Defined by DIN 463. | washers |
| DIN 462 | — | — | Tab washers (single tab, thin pattern) | Thin single-tab lock washer used to prevent rotation of nuts, bolts or shafts by bending the tab against a flat surface or into a slot. Defined by DIN 462. | washers |
| DIN 6886 | — | — | Stressed-Type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application | Defines taper keys and corresponding keyways for stressed-type shaft-hub fastenings, including dimensions and application rules. Base taper-key standard in the DIN 688x family. | keys |
| DIN 258 | — | — | Taper pins with thread ends and constant taper lengths | Precision taper pin with external thread for accurate alignment and secure positioning, featuring constant taper lengths for repeatable fit. Defined by DIN 258 (Edition 2012-05). | pins |
| ISO 8750 | DIN EN ISO 8750 | — | Spring-type straight pins - Coiled, standard duty | Standard-duty coiled spring pin for general-purpose fastening, shock absorption and fatigue-resistant joints. Defined by ISO 8750:2007. | pins |
| DIN 7971 | — | — | Slotted oval-head tapping screws | Slotted raised countersunk (oval-head) self-tapping screw for sheet metal and thin materials. Defined by DIN 7971. | tapping-screws |
| DIN 7500 | — | — | Thread-forming screws for metals | Thread-forming screw for creating metric internal threads in ductile metals. Produces a work-hardened, high-strength internal thread without cutting. Defined by the DIN 7500 series. | screws |
| DIN 7502 | — | — | Slotted pan-head tapping screws | Slotted pan-head self-tapping screw for sheet metal and thin materials. Defined by DIN 7502. | tapping-screws |
| DIN 7501 | — | — | Slotted raised countersunk (oval-head) tapping screws | Slotted raised countersunk (oval-head) self-tapping screw for sheet metal and thin materials. Defined by DIN 7501 (Form B). | tapping-screws |
| DIN 7503 | — | — | Thread-rolling screws for metals (trilobular form) | Trilobular thread-rolling screw for forming high-strength internal threads in ductile metals. Produces a cold-worked, load-bearing thread without cutting. Defined by DIN 7503. | tapping-screws |
| ISO 965-1/2/3 | DIN EN ISO 965-1/2/3 | — | ISO metric screw threads - Tolerances (Parts 1-3) | Defines tolerance classes, limits of size and deviations for ISO metric screw threads, including general-purpose fits and special provisions for galvanised threads. Covers internal and external thread classes such as 6H, 6g, 4H, 4g6g. | threads |
| DIN 8141 | — | — | Threaded inserts for metal (heavy-duty) | Solid-body heavy-duty threaded insert for creating strong, wear-resistant internal threads in metal components. Suitable for high-load and permanent installations. Defined by DIN 8141. | inserts |
| DIN 8140-1 | DIN EN ISO 8140-1 | — | Wire thread inserts for ISO metric screw threads - Part 1: Dimensions and technical specifications | Defines dimensions and technical requirements for wire thread inserts used to create wear-resistant ISO metric internal threads. Covers standard lengths, tolerances and performance characteristics. Edition 2022-04. | inserts |
| DIN 975 | DIN 976-1 | — | Fully threaded rods - standard lengths (1 m, 2 m, 3 m) | Fully threaded metric rod supplied in standard lengths of 1 m, 2 m or 3 m for general fastening, bracing and studding applications. DIN 975 is the traditional designation; DIN 976-1 is the current harmonised standard. | rods |
| DIN 976-1 | DIN 975 |
|
Fasteners - Stud bolts - Part 1: Metric thread | Stud bolts with metric threads and defined dimensional tolerances. Used for fastening, bracing and structural applications. DIN 976-1 is the current specification and supersedes the traditional DIN 975 designation. | rods |
| DIN 6798 | — | — | Toothed lock washers - internal, external and countersunk forms | Series of toothed lock washers with internal, external or countersunk serrations for improved vibration resistance and locking performance. Includes Forms A (internal teeth), J (external teeth) and V (countersunk). | washers |
| ASME B1.1 | ANSI B1.1 | — | Unified inch screw threads - UNC, UNF, UNEF, UN and UNR | Defines the Unified inch screw thread system, including UNC, UNF, UNEF, constant-pitch UN series and rounded-root UNR external threads. Covers thread geometry, tolerances and classes 1A/1B, 2A/2B and 3A/3B. | threads |
| DIN 436 | — | — | Square washers - especially for wood constructions | Square washers used primarily in timber and wood construction to distribute load under bolt heads and nuts. Defined by DIN 436 (Edition 2024-10). | washers |
| DIN 435 | — | — | Square taper washers for I-sections | Square taper washers designed for use on I-sections, providing a level bearing surface for bolts passing through inclined flanges. Defined by DIN 435 (Edition 2024-10). | washers |
| DIN 434 | — | — | Square taper washers for U-sections | Square taper washers designed for use on U-sections, providing a level bearing surface for bolts passing through inclined flanges. Defined by DIN 434 (Edition 2024-10). | washers |
| DIN 7989-1 | — | — | Washers for steel structures - Part 1: Product grade C | Square or large-series washers used in steel construction applications, manufactured to product grade C. Provides increased bearing area for structural bolted joints. Defined by DIN 7989-1 (Edition 2001-04). | washers |
| DIN 7989-2 | — | — | Washers for steel structures - Part 2: Product grade A | Precision washers for steel construction applications, manufactured to product grade A. Provides tighter dimensional tolerances for structural bolted joints. Defined by DIN 7989-2 (Edition 2001-04). | washers |
| DIN 1440 | — | — | Washers for clevis pins (standard type) | Standard-duty washers used in clevis pin assemblies to provide proper bearing surface and axial retention in mechanical linkages. Defined by DIN 1440. | washers |
| DIN 1441 | — | — | Washers for clevis pins (variant form) | Variant form of standard-duty washers used in clevis pin assemblies. Provides correct bearing and axial retention in mechanical linkage joints. Defined by DIN 1441. | washers |
| DIN EN ISO 8751 | ISO 8751 | — | Spring-type straight pins - Coiled, light duty | Light-duty coiled spring pin used where reduced radial stress and lower insertion forces are required. German version EN ISO 8751:2007. | pins |
| DIN EN ISO 13337 | ISO 13337 | — | Spring-type straight pins - Slotted, light duty | Light-duty slotted spring pin used where reduced radial stress and lower insertion forces are required. German version EN ISO 13337:2009. | pins |
| DIN 6319 | — | — | Spherical-seat washers for angular compensation | Washer system consisting of spherical and conical mating elements used to compensate for angular misalignment in bolted joints. Includes forms A, B and C. | washers |
| DIN 137 | — | — | Wave spring washers - Forms A and B | Single-turn wave spring washers used to provide elastic preload in bolted joints. DIN 137 defines two forms: A (curved) and B (multi-wave). | washers |
| BS 84 | — | — | Whitworth threads - BSW and BSF | Defines the Whitworth thread system including BSW (coarse) and BSF (fine) series, covering 55° thread form geometry, pitches, diameters and tolerances. | threads |
| DIN 315 | — | — | Wing nuts - Rounded wings | Hand-operated wing nut with rounded wings for tool-free tightening and loosening. Defined by DIN 315 (Edition 2016-12). | nuts |
| DIN 316 | — | — | Wing screws - Rounded wings | Hand-operated wing screw with rounded wings for tool-free tightening and loosening. Defined by DIN 316 (Edition 2016-12). | screws |
| DIN 741 | — | — | Wire rope clips | Malleable wire rope clip used to secure wire rope terminations such as loops and thimble assemblies. Defined by DIN 741. | clamps |
| DIN 571 | — | — | Hexagon head wood screws | Heavy-duty wood screw with hexagon head, coarse thread and tapered point for direct installation into timber. Defined by DIN 571 (Edition 2016-12). | screws |
| DIN 7997 | — | — | Cross recessed countersunk head wood screws | Pozidriv countersunk wood screw with tapered shank for general timber fastening. Defined by DIN 7997 (Edition 2016-12). | screws |
| DIN 7996 | — | — | Slotted pan head wood screws | Traditional slotted pan head wood screw with tapered shank for timber fastening. Defined by DIN 7996. | screws |
| ISO 10683 | DIN 267-10 | — | Zinc flake coatings | Performance requirements and test methods for non-electrolytic zinc flake coating systems providing high corrosion resistance for threaded fasteners and components. | surface-treatments |
| ISO 8677 | DIN 960 | — | Hexagon head bolts – Fine pitch (part thread) | Partially threaded fine‑pitch hexagon head bolt for precision mechanical and automotive applications. | bolts |
| ISO 8676 | DIN 961 | — | Hexagon head bolts – Fine pitch (full thread) | Fully threaded fine‑pitch hexagon head bolt for machinery, automotive and precision assemblies. | bolts |
| DIN 7990 | — | — | Hexagon bolts for steel structures | Legacy DIN-pattern structural bolt used in steel construction prior to adoption of ISO/EN structural bolting standards. | bolts |
| DIN 6914 | — | — | High-strength structural bolts (HV) | High-strength hexagon structural bolt (HV type) used in preloaded structural steel joints. Predecessor to EN 14399-4. | bolts |
| ISO 7412 | — | — | Structural bolts for steel structures | Hexagon structural bolt for steel construction applications, defined by ISO 7412. | bolts |
| ISO 7411 | — | — | Nuts for structural bolting assemblies | Hexagon nuts for use with structural bolts in steel construction, defined by ISO 7411. | nuts |
| DIN 7995 | — | — | Mushroom head square neck bolts | Timber bolt with mushroom head and square neck for secure anti-rotation seating in wood assemblies. | bolts |
| ISO 15977 | DIN EN ISO 15977 | — | Open-End Blind Rivets – Protruding Head (AlA/St) | Open-end blind rivet with break-pull mandrel and protruding head, aluminium alloy body with steel mandrel. | rivets |
| ISO 15979 | DIN EN ISO 15979 | — | Open-End Blind Rivets – Protruding Head (St/St) | Open-end blind rivet with protruding head, steel body with steel mandrel. | rivets |
| ISO 15981 | DIN EN ISO 15981 | — | Open-End Blind Rivets – Protruding Head (AlA/AlA) | Open-end blind rivet with protruding head, aluminium alloy body with aluminium alloy mandrel. | rivets |
| ISO 15983 | DIN EN ISO 15983 | — | Open-End Blind Rivets – Protruding Head (A2/A2) | Open-end blind rivet with protruding head, stainless steel body with stainless steel mandrel. | rivets |
| ISO 16582 | DIN EN ISO 16582 | — | Open-End Blind Rivets – Protruding Head (Cu/St, Cu/Br, Cu/SSt) | Open-end blind rivet with protruding head, copper body with steel, brass or stainless steel mandrel. | rivets |
| ISO 15978 | DIN EN ISO 15978 | — | Open-End Blind Rivets – Countersunk Head (AlA/St) | Open-end blind rivet with countersunk head, aluminium alloy body with steel mandrel. | rivets |
| ISO 15980 | DIN EN ISO 15980 | — | Open-End Blind Rivets – Countersunk Head (St/St) | Open-end blind rivet with countersunk head, steel body with steel mandrel. | rivets |
| ISO 15982 | DIN EN ISO 15982 | — | Open-End Blind Rivets – Countersunk Head (AlA/AlA) | Open-end blind rivet with countersunk head, aluminium alloy body and mandrel. | rivets |
| ISO 15984 | DIN EN ISO 15984 | — | Open-End Blind Rivets – Countersunk Head (A2/A2) | Open-end blind rivet with countersunk head, stainless steel body and mandrel. | rivets |
| ISO 16583 | DIN EN ISO 16583 | — | Open-End Blind Rivets – Countersunk Head (Cu/St, Cu/Br, Cu/SSt) | Open-end blind rivet with countersunk head, copper body with steel, brass or stainless steel mandrel. | rivets |
| ISO 15973 | DIN EN ISO 15973 | — | Closed-End Blind Rivets – Protruding Head (AlA/St) | Closed-end blind rivet with protruding head, aluminium alloy body with steel mandrel. | rivets |
| ISO 15975 | DIN EN ISO 15975 | — | Closed-End Blind Rivets – Protruding Head (Al/AlA) | Closed-end blind rivet with protruding head, aluminium body with aluminium alloy mandrel. | rivets |
| ISO 15976 | DIN EN ISO 15976 | — | Closed-End Blind Rivets – Protruding Head (St/St) | Closed-end blind rivet with protruding head, steel body with steel mandrel. | rivets |
| ISO 16585 | DIN EN ISO 16585 | — | Closed-End Blind Rivets – Protruding Head (A2/SSt) | Closed-end blind rivet with protruding head, stainless steel body with stainless steel mandrel. | rivets |
| ISO 15974 | DIN EN ISO 15974 | — | Closed-End Blind Rivets – Countersunk Head (AlA/St) | Closed-end blind rivet with countersunk head, aluminium alloy body with steel mandrel. | rivets |
| ISO 1461 | — | — | Hot dip galvanized coatings on fabricated iron and steel articles | Specifies coating thickness, appearance and performance requirements for batch hot-dip galvanized coatings on steel components, including fasteners. | surface-treatments |
| ISO 14713-1 | — | — | Zinc coatings — Guidelines and recommendations for the protection against corrosion — Part 1: General principles | Provides general guidance on corrosion protection using zinc coatings, including electroplating, hot-dip galvanizing and zinc flake systems. | surface-treatments |
| ISO 14713-2 | — | — | Zinc coatings — Guidelines and recommendations for the protection against corrosion — Part 2: Hot dip galvanizing | Provides corrosion performance guidance and design considerations for hot-dip galvanized coatings on iron and steel components. | surface-treatments |
| ISO 14713-3 | — | — | Zinc coatings — Guidelines and recommendations for the protection against corrosion — Part 3: Sherardizing | Defines corrosion protection principles and performance characteristics for sherardized (thermal diffusion) zinc coatings on steel parts and fasteners. | surface-treatments |
| ISO 9587 | — | — | Metallic and other inorganic coatings — Phosphate conversion coatings — General requirements | Specifies general requirements for phosphate conversion coatings used to improve corrosion resistance and provide a base for lubrication or painting. | surface-treatments |
| ISO 9588 | — | — | Metallic and other inorganic coatings — Phosphate conversion coatings — Requirements for fasteners | Defines phosphate coating requirements specifically for threaded fasteners, including coating weight, adhesion and performance. | surface-treatments |
| ISO 10684 | — | — | Fasteners — Hot dip galvanized coatings | Specifies requirements for hot-dip galvanized coatings applied to threaded fasteners, including coating thickness, thread tolerances and corrosion performance. | surface-treatments |
| ISO 6157-1 | — | — | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs | Specifies permissible material discontinuities such as seams, laps, folds and inclusions for bolts, screws and studs. | materials |
| ISO 6157-2 | — | — | Fasteners — Surface discontinuities — Part 2: Nuts | Defines acceptable material discontinuities for nuts, including cracks, seams and other imperfections. | materials |
| ISO 6157-3 | — | — | Fasteners — Surface discontinuities — Part 3: Set screws | Specifies permissible material discontinuities for set screws, including cracks, seams and forging defects. | materials |
| ISO 16426 | — | — | Fasteners — Quality assurance system | Specifies quality management, inspection routines, batch traceability and conformity assessment requirements for fastener manufacturers and suppliers. | quality |
| ISO 16228 | — | — | Fasteners — Marking and labelling | Defines marking requirements for fasteners, including manufacturer identification, property class markings, packaging labels and traceability information. | quality |
| IATF 16949 | ISO/TS 16949 (withdrawn) | — | Quality management system requirements for automotive production and relevant service part organizations | Defines the global automotive industry quality management system requirements, replacing ISO/TS 16949. Must be implemented in conjunction with ISO 9001:2015 and includes requirements for process control, traceability, defect prevention, supplier development and continuous improvement. | quality |
Further Reading
The organisations below publish and maintain the international and national standards referenced in this table.
- International Organization for Standardization (ISO) – Official Standards Catalogue
- Deutsches Institut für Normung (DIN) – German National Standards
- European Committee for Standardization (CEN) – EN Standards Overview
- British Standards Institution (BSI) – BS Standards and Publications
- American National Standards Institute (ANSI) – U.S. Standards System
- ASME – Codes and Standards for Mechanical Engineering